Service landscape lighting
Why it matters
Corroded connectors, buried wires, and burned bulbs reduce visibility and safety.
Stop forgetting to do this.
Hearth generates a personalized maintenance schedule so you never miss another service landscape lighting.
How to do it
- 1
Turn off main power at circuit breaker or control box.
- 2
Inspect each landscape light fixture for burned bulbs.
- 3
Replace burned bulbs with manufacturer-approved equivalent.
- 4
Check all connection points for corrosion.
- 5
Clean corroded connectors with wire brush or electrical contact cleaner.
- 6
Verify weatherproof gaskets are intact; replace if cracked or missing.
- 7
Check that all wires are properly buried at least 4 inches deep.
- 8
Restore power and test all lights to confirm operation.